Various products made from industrial aluminum profiles are referred to as industrial aluminum profile products, such as aluminum profile workbenches, belt conveyors, industrial protective fences, clean room partitions, machine equipment protective covers, aluminum profile flow racks, aluminum profile storage racks, and so on. These all belong to the category of industrial aluminum profile products. Given that industrial aluminum profiles are inherently lightweight, environmentally friendly, corrosion-resistant, and easy to clean, the service life of industrial aluminum profile products is relatively long. However, in practical use, the service life of many aluminum profile products is not ideal. What factors affect the service life of aluminum profile products?
1. Insufficient structural strength: Industrial aluminum profiles come in varying thicknesses and cross-sectional sizes. If a thin profile with a small cross-section is used to manufacture an aluminum profile product with high load-bearing strength, its service life will be affected. This is akin to asking a small child to perform a physically demanding task that is meant for adults, and eventually, the child will become exhausted. Therefore, selecting industrial aluminum profiles of appropriate strength as raw materials is crucial.
2. The design scheme is unreasonable. The design scheme of an aluminum profile product is crucial. It should be considered that it is convenient for people to use, and the load should be balanced. If lightweight materials are used in areas with high compression, and heavy materials are used in areas with low compression, it will be twice as hard to achieve half the result.
3. Improper use of aluminum profile accessories: Industrial aluminum profile products are primarily assembled using specialized aluminum profile accessories, and none of the designated positions for these accessories can be omitted. Where strong corner connectors are required, ordinary corner connectors must not be used.
4. The quality of other accessories must be guaranteed. For example, the work surface of the workbench, which is now commonly made of anti-static material, should not only have anti-static properties but also be resistant to wear and easy to clean. The aluminum frame is not prone to breakage, and replacing the work surface when it breaks can be quite inconvenient.